Long Range Radio Telemetry Module With Frequency Hopping Spread Spectrum
Introduction
The FDM-660X is a compact 200MW IP PtMP device, optimized for long-range communication and high-data-rate airborne missions. For ultra-long-range connectivity, higher power configurations such as a 10W model with PA can reach 100-150km wireless link.
This system leverages FPGA architecture, supports multi-waveform functionality, ultra-wideband operation, and high-speed frequency hopping in a star topology. It is capable of handling both data and video transmission in various configurations, including point-to-point, point-to-multipoint, and multipoint-to-multipoint setups.
Advantages of Telemetry Module (FDM-660X):
Long NLOS Transmission: Capable of stable communication over distances ranging from 500m to 3km in Non-Line-of-Sight (NLOS) conditions between ground-based systems.
Support for High-Speed Movement: The FDM-660X maintains a stable communication link even at speeds of up to 300 km/h, making it ideal for high-speed platforms.
High Throughput: Achieves uplink and downlink speeds between 80Mbps and 100Mbps simultaneously, ensuring high data transfer rates for demanding applications.
Power Self-Adaptive: The device automatically adjusts its transmission and reception power based on real-time channel conditions, optimizing energy consumption and reducing interference across the network.
Specification of Telemetry Module
| Transmitting | Master control module image acquisition device for data acquisition and encoding | Camera |
| The main control module send the encoded data to FD-610X through the USB or HSIC interface | Physical interface USB/HISC, logically virtual into a network card |
| FD-610X sends the encoded image data to the receiving end through the air interface. | |
| Receiving | The FD-610X receiving end gets the encoded image data and then transparently transmits it to the main control module. | |
| | FD-610X sends data to the main control module via USB or HSIC interface. | Physical interface USB/HISC, logically virtual into a network card |
| | After the main control module receives data, it performs image decoding and display. | |
| PCB Size | 43.40*45.00*3.00mm | |
| RF | Frequency | 2.4Ghz: 2401.5-2481.5 MHz |
| 1.4Ghz: 1427.9-1467.9MHz |
| 800Mhz: 806-826 MHz |
| RF Power | 25dBm | |
Sensitivity
(Access) | 2.4Ghz(24415 Channel)
20Mhz:-99dBm
10Mhz:-103dBm
5Mhz:-104dBm
3Mhz:-106dB | Access |
1.4Ghz(14379 Channel)
10MHz:-103dBm
5Mhz:-104dBm
3Mhz:-106dBm | Access |
800Mhz(8160 Channel)
10MHz:-103dBm
5Mhz:-106dBm
3Mhz:-108dBm | Access |
| Interface | UAR | 1 |
| COM-UART | 1 |
| HSIC | USB 2.0 High Speed |
| US | USB 2.0 High Speed |
| I2C | 1 |
| GPIO | 6 |
| JTAG | 1 |
| Antenna | 2 |
FAQ
1. How much current(amps )does the module draw?
-
The Power consumption is about 4W.
-
Current equals power consumption divided by supply voltage
-
4 / 12=0.33A, if you're on a 12-volt supply.
2. I need the 150 km transmission range wireless video data module, What frequency range is better?
-
There are two versions on the different frequency range.
-
1st version's frequency range is from 1420 Mhz to 1530 Mhz, with 110Mhz frequency width for FHSS.
-
2nd version's frequency range is from 806 Mhz to 826 Mhz or 1420 Mhz ~1530 MHz, with only 20Mhz or 40Mhz frequency width for FHSS.
-
Our engineer recommended that you choose 1st version, as it can supply more frequent points to choose from when the signal is weak or interfered with.
Product Tags:
|
|
30Mbps Telemetry Module 1.4Ghz 2.4Ghz Long Range Communication Module Images
|
